© 2016 Barry Mountford

Creating Volumetric lighting/Light rays

January 5, 2018

 

 

Ever wondered how you can create volumetric lighting and light rays in both your stills and video? Well in this blog post and  video I will show you  how to create them the practical way using just card, smoke and light !  and it’s great fun! Below is a list of all the gear used to create the short video and all the straight out of camera raw images.

 

Vlog Camera:    http://amzn.to/2EaRpTs

 

Teaser trailer camera:     http://amzn.to/2CJjepT

 

Shotgun Mic:     http://amzn.to/2CJSbuq

 

Studio Lighting:    http://amzn.to/2CIf957

 

Softbox:      http://amzn.to/2CWhrdR

 

Smoke Machine:    http://amzn.to/2CHlLkg

 

Foamboard:       http://amzn.to/2lW9Fsw

 

Snoot:      http://amzn.to/2CJUiym

 

Clamps:    http://amzn.to/2CYo1Ri

 

Millennium Falcon:     http://amzn.to/2CWrwYa

 

Kylo Ren:     http://amzn.to/2CTP9AJ

 

Rey:     http://amzn.to/2At7MsF

 

 

 

So first we need to cut out or title in our foam board, you can use any font you prefer I chose this font to keep the Starwars theme going. 

 

Now we need to create an atmosphere and to do this we are using a inexpensive smoke machine  ,  we need to blast that smoke in the area we are going to shoot in, pump as much in as you like to get the desired effect. To get the title effect in the video simply use your title you have cut out of  some foam board  

 

clamp to a stand , leave  your main room  light on and setup your camera on a tripod  and focus on the cut out then place your light I used this light  but you can use any small point light source and I found using a snoot fitted with grid  gave me the best results , turn the light on and set you exposure for the lght coming through the cutout, now here’s where the fun starts turn off the main room light and instantly you will see the cool light rays beaming through the cutout with the room filled with smoke it’s creating that volumetric  light effect, now to get movement like I did in the video simply take your light source and run it left to right behind your foam board with the cutout which gives  that cool title effect.

 

Below is a pull back shot of the Millennium Falcon

 You can see how effective these results are from the raw pullback shots.

 

 

 

This effect is so simple you can use in all sorts of scenarios, scaling the whole set up you can use it effectively in your portraits, create really cool looking environmental shots where your lights source could be the natural light coming through blinds on the window all you have to do is add the smoke/atmosphere, the possibilities are limited to only our imagination.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hope you have enjoyed this post and found it helpful, I can only urge you to give a a go it is great fun! 

Please reload

Featured Posts

The $5 Watch Shot!

April 28, 2019

1/2
Please reload

Recent Posts

April 28, 2019

Please reload

Archive
Search By Tags